iLast Engine Flush 1QT

iLast Engine Flush

removes sludge, gums and varnishes. By freeing sticking valves and rings, an engine runs smoother and better. Do not use this product if foil seal has been removed.

INSTRUCTIONS:

1. Oil in crankcase must be up to a safe level (DO NOT overfill crankcase).

2. Before changing oil and filter, add entire contents of bottle to a cold engine.

3. Allow engine to idle at normal speed for 5 minutes. DO NOT DRIVE VEHICLE.

4. Drain crankcase and remove oil filter. Replace drain plug and install new oil filter.

5. Refill crankcase with oil according to vehicle manufacturer’s recommendation.

6. Extremely dirty engine may require a second treatment.

DANGER: Combustible. Contains petroleum distillates. Keep away from heat and flame. Product spilled on hot surface may ignite. If on skin or in eyes flush with water for 15 minutes. If irritation persists call a physician. Do not take internally. If swallowed, do not induce vomiting. Contact a physician immediately. Use with adequate ventilation.

KEEP OUT OF REACH OF CHILDREN

Dispose of empty bottle in accordance with local, state and federal regulations.

SKU: FPiL0014 Category: Tags: , ,

Reviews

There are no reviews yet.

Be the first to review “iLast Engine Flush 1QT”

Your email address will not be published.